Builders Merchants Architects Case Studies

Modulite Medium Dense Lightweight Paint Grade Blocks

Modulite Medium Dense Lightweight Paint Grade Blocks are produced using responsibly resourced sustainable materials maintaining a high recycled content and use no PFA in their make-up. Weighing approximately 14.2kg this block meets all the criteria of HSE Manual Handling recommendations.

Modulite Medium Dense Lightweight Blocks are specified where aesthetically internal finishes are required. It has excellent noise insulation characteristics and is extremely resilient to ambient conditions. This product is designed to accept most commercial paint solutions or may be left ’fair faced’ as is required but it should be noted that:

Blocks should be allowed to dry with all dirt, dust and efflorescence being removed before the application of any final finish. 

CCP recommend that due to natural variations in aggregates projects should source material from the same CCP site so as to ensure so far as is reasonably practicable the continuity of the textural finish and hue especially where they are to be left fair faced.

CCP blocks are manufactured and tested in accordance with BS EN 771-3: 2011; Specification for Masonry Units: Aggregate Concrete Masonry Units.

For technical specifications click on the icons below or to contact us click on the RED contact box to the right

 


Modulite Medium Dense Lightweight Paint Grade Blocks Specification

Compliance with EN1996-1Group 1Manufacturing StandardBS EN 771 - 3 : 2011Tolerance CatergoryD1Size440mm x 215mm x 100mm

Modulite Medium Dense Lightweight Paint Grade Blocks Downloads

Contact

Llay Rd, Llay,
Wrexham,
Clwyd,
LL12 0TL

IMPORTANT INFORMATION
CCP do not recommend our 'SEJ' Utility Range of paving products for 'open areas' or decorative projects such as feature patios.